Talk to us?
Talk to us?
Holter Monitor ZHM-A10 comes with a 250Hz sampling rate and a 12-bit resolution. It also features a 12-channel digital recording for comprehensive cardiac monitoring with high-resolution output. This compact powerhouse delivers full-disclosure, no-compression recordings for a crystal-clear picture of your patient’s heart health. Our product stores hours of ECG data on a built-in SD card. It is ideal for modern healthcare settings, offering high-resolution cardiac monitoring.
$2750
| Channels | 12-channel digital recording |
| Recording Type | Full disclosure, no compression |
| Sampling Rate | 250Hz |
| Resolution | 12-bit |
| Input Impedance | >10MΩ |
| CMRR | >60dB |
| Frequency Response | 0.1 to 60 Hz |
| Minimum Input Signal | 50μV |
| Sensitivity | 10mm/mV ±5% |
| Time Constant | ≥3.2s |
| Baseline Stability | ±2.5% |
| Inter-channel Interference | <0.15mV |
| Input Circuit Current | <0.1μA |
| Dynamic Input Voltage | ±6.3mV |
| Polarizing Voltage | ±300mV |
| Memory Capacity | ≥256MB |
| Battery | 1.5V Alkaline (typical 24-hour use) |
| Operating Temperature | 0°C to +45°C |
| Non-operating Temperature | 0°C to +60°C |
| Operating Humidity | 10% to 95% (Non-condensing) |
| Non-operating Humidity | 5% to 95% (Non-condensing) |
| Atmospheric Pressure | 86kPa to 106kPa |
| Storage | 40GB free space on hard drive |
| Display | 15 |
| Packaging Dimension | 30 × 25 × 20cm |
| Weight | 2kg |
Full disclosure recording
High sampling rate
Smart signal verification
Seamless data storage & transfer
Powerful noise reduction
Flexible operating range
Low power consumption
Holter Monitor ZHM-A10 is an essential tool for modern healthcare settings, offering high-resolution cardiac monitoring that supports timely diagnosis, patient safety, and clinical efficiency. Used for routine ECGs, pre-operative cardiac screening, and continuous patient monitoring in emergency, ICU, and CCU settings. The device helps clinicians detect arrhythmias, ischemia, and other heart conditions with speed and accuracy.