Talk to us?
Talk to us?
Electrosurgical unit ZEU-A10 is used for monopolar surgeries. It offers energy output up to 150 W. Therapeutic methods includes monopolar cut, blend, coagulation with lower thermal damage risks. It offers separate control panel for a range of operations.
Output Power | 100 W |
Operating frequency( monopolar ) | 330 kHz/430 kHz |
Power Rating | 500 VA ± 10 % |
Monopolar cut operation( pure/ blend cut ) | 0 to 100 W (300 ohm ) |
Monopolar coagulation operation( forced ) | 0 to 80 W ( 500 ohm ) |
Monopolar coagulation operation( soft ) | 0 to 40 W ( 500 ohm ) |
Energy output up to 150 W
Digital display for visualization of working parameters
Push button for quick change of parameters
Error alarm for failure detection system
Easy to operate
This is used during general surgery. Also used during neurosurgery.
Frequently Asked Question
Electrosurgical units typically have the following modes: Cut Mode: Produces a continuous waveform for precise tissue cutting. Coagulation Mode: Uses an intermittent waveform to control bleeding without significant tissue destruction. Blend Mode: A combination of cutting and coagulation for controlled tissue removal with hemostasis.
Yes, but with caution. Electrosurgical units can cause electromagnetic interference (EMI) with pacemakers and implantable cardioverter defibrillators (ICDs). Use bipolar electrosurgery when possible and consult a cardiologist before the procedure.
Reduced bleeding due to simultaneous cutting and coagulation. Faster surgical procedures. Minimized risk of infection due to cauterization. Greater precision and efficiency in tissue dissection.