Talk to us?
Talk to us?
Zimed offer varied range of Electro-surgical Units used during monopolar and bipolar surgeries to remove unwanted or harmful tissue. Our products are fabricated for its precise destruction of tissues and control of blood clots during surgery. Our products are ISO and CE approved and certified.
Output Power: 100 W
Operating frequency( monopolar ): 330 kHz/430 kHz
Power Rating: 500 VA ± 10 %
Monopolar cut operation( pure/ blend cut ): 0 to 100 W (300 ohm )
Output Power: 150 W
Operating frequency( monopolar ): 330 kHz/430 kHz
Power Rating: 500 VA ± 10 %
Monopolar cut operation( pure/ blend cut ): 0 to 150 W (300 ohm )
Output Power: 80 W
Operating frequency( monopolar ): 330 kHz/430 kHz
Power Rating: 300 VA ± 10 %
Operating frequency( bipolar ): 1000 kHz
Output Power: 300 W
Operating frequency( monopolar ): Monopolar: 330 kHz / 430 kHz
Monopolar cut( load 500 ohm ): Pure cut : 0 to 300 W
Monopolar coagulation( load 500 ohm ): Pure cut : 0 to 300 W
Output Power: 300 W
Operating frequency( monopolar ): Monopolar: 330 kHz / 430 kHz
Monopolar cut( load 500 ohm ): Pure cut : 0 to 300 W
Monopolar coagulation( load 500 ohm ): General surgery : 0 to 120 W
Output Power: 300 W
Operating frequency( monopolar ): Monopolar: 330 kHz / 430 kHz
Monopolar cut( load 500 ohm ): Pure cut : 0 to 300 W
Monopolar coagulation( load 500 ohm ): General surgery : 0 to 120 W
Monopolar cut Power(load 500 ohm):
Pure cut: 0 to 200 W
Blend 1: 0 to 200 W
Blend 2: 0 to 150 W
Monopolar Coagulation Power(load 500 ohm):
Spray: 0 to 120 W
Forced: 0 to 120 W
Soft: 0 to 120 W
Bipolar Power(load 100 ohm):
Standard: 0 to 100 W
Fine: 0 to 50 W
Modulation frequency (Monopolar Cut):
Blend 1: 20 kHz
Blend 2: 20 kHz
Frequency: 500 kHz across all modes for stable operation.
Pure Cut:
0 to 100 W/4000 ohms
Precise energy output for cutting.
Blend Cut:
0 to 70 W/4000 ohms
Ideal for mixed cutting and coagulation.
Standard Coag:
0 to 70 W/4000 ohms
Efficient coagulation for tissue control.
Type: Class I, CF type
Ambient Temperature Range: 10℃ to 40℃
Relative Humidity Range: 30% to 75%
Atmospheric Pressure Range: 700hPa to 1060hPa
Cutting Output: 350 W
Coagulation Output: Soft Coag: 150 W, Strong Coag: 120 W, Jet Coag: 100 W
Blend Modes: Blend 1: 250 W, Blend 2: 200 W, Blend 3: 150 W
Bipolar Coagulation: 70 W × 2
Frequently Asked Question
Electrosurgical units typically have the following modes: Cut Mode: Produces a continuous waveform for precise tissue cutting. Coagulation Mode: Uses an intermittent waveform to control bleeding without significant tissue destruction. Blend Mode: A combination of cutting and coagulation for controlled tissue removal with hemostasis.
Yes, but with caution. Electrosurgical units can cause electromagnetic interference (EMI) with pacemakers and implantable cardioverter defibrillators (ICDs). Use bipolar electrosurgery when possible and consult a cardiologist before the procedure.
Reduced bleeding due to simultaneous cutting and coagulation. Faster surgical procedures. Minimized risk of infection due to cauterization. Greater precision and efficiency in tissue dissection.
Expert Help Desk